High-performance filters designed for PCB mounting, as close to the circuits concerned as possible.
These filters allow you to not only protect your equipment against transient intereference from the mains, but also to limit unwanted voltage interference from the equipment itself.
Nominal current: | 1 A or 2 A |
Rated voltage: | 250 Vac, 50 / 60 Hz |
Inductance: | 2 x 10 mH (1 A), 2 x 4 mH (2 A) |
Voltage / neutral capacity: | 0.015 μF |
Leakage current: | 0.25 mA maximum |
Height: | 25mm |
Pins (mm): | L 4.5 x ? 0.6 |
Operating temperature: | -25 °C → +85 °C |
Dimensions | ||||||||
A | H | a | b | c | d | e | h | ? |
(mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) |
25 | 25 | 5 | 2.5 | 15 | 2.5 | 10 | 4.5 | 0.6 |
UL 1283, EN 133200, IEC 60950