Single-sided boards for wiring by wrapping, with optimum flexibility and maximum density.
The DIP sockets are held in place by soldering the outer pins to the corresponding square pads.
Reference grid on both sides of the board, facilitating wiring and component mounting.
Stock number 159-6394 is a die set of 60 x 179 holes with a pitch of 2.54 mm, designed for prototyping of any dimensions.
Compatible with DIN 41494 (KM6-II) | |
Material: | Epoxy glass |
Thickness of copper: | 35 μm |
Mounting for DIN 41612 connectors | |
Max. operating temperature: | +155 °C |
Stock | dimensions (mm) | ||
no. | Length | width | height |
434-605 | 160 | 100 | 3U |
435-298 | 220 | 100 | 3U |
434-611 | 160 | 233.4 | 6U |
435-305 | 220 | 233.4 | 6U |
159-6394 | 454.6 | 179 | - |