Clear 5.6 " display
Impulse signal with variable flanks
AM, FM, PM, FSK, PWM
Sweep and burst
USB port on the front panel
Multilingual user interface
USB, GPIB and LAN interface
Model | AFG3021B | AFG3022B | AFG3101 | AFG3102 |
Stock no. | 535-581 | 535-571 | 535-597 | 535-587 |
Channels | 1 | 2 | 1 | 2 |
Display | 5.6" monochrome | 5.6" colour display | 5.6" colour display | 5.6" colour display |
Frequency range | 1 μHz → 25 MHz | 1 μHz → 25 MHz | 1 μHz → 100 MHz | 1 μHz → 100 MHz |
Resolution | 1 μHz or 12 digits | 1 μHz or 12 digits | 1 μHz or 12 digits | 1 μHz or 12 digits |
Sinus | ||||
Frequency range | 1 μHz → 25 MHz | 1 μHz → 25 MHz | 1 μHz → 100 MHz | 1 μHz → 100 MHz |
Distortion factor (10 Hz → 20 kHz) | <0.2% | <0.2% | <0.2% | <0.2% |
Square | ||||
Frequency range | 1 μHz → 12.5 MHz | 1 μHz → 12.5 MHz | 1 μHz → 50 MHz | 1 μHz → 50 MHz |
Rise time | ≤18 ns | ≤18 ns | ≤ 5 ns | ≤ 5 ns |
Sawtooth | ||||
Frequency range | 1 μHz → 250 kHz | 1 μHz → 250 kHz | 1 μHz → 1 MHz | 1 μHz → 1 MHz |
Linearity | ≤0.1% | ≤0.1% | ≤0.15% | ≤0.15% |
Pulse | ||||
Frequency range | 1 mHz → 12.5 MHz | 1 mHz → 12.5 MHz | 1 mHz → 50 MHz | 1 mHz → 50 MHz |
Rise time | 18 ns → 625 s | 18 ns → 625 s | 5 ns → 625 s | 5 ns → 625 s |
Arbitrary signals | ||||
Frequency range | 1 mHz → 12.5 MHz | 1 mHz → 12.5 MHz | 1 mHz → 50 MHz | 1 mHz → 50 MHz |
Sample-Rate | 250 MS/s | 250 MS/s | 250 MS/s | 250 MS/s |
Vertical resolution | 14 Bit | 14 Bit | 14 Bit | 14 Bit |
Amplitude | 10 mV → 10 Vss (at 50 Ω) 20 mV → 20 Vss (no load) | 10 mV → 10 Vss (at 50 Ω) 20 mV → 20 Vss (no load) | 20 mV → 10 Vss (at 50 Ω) 40 mV → 20 Vss (no load) | 20 mV → 10 Vss (at 50 Ω) 40 mV → 20 Vss (no load) |
Gate/Trigger input | 10 kΩ |
Modulation input | 10 kΩ |
Signal output | 50 Ω |
Dimensions (WxHxD) | 329.6 x 156.3 x 168.0 mm |
Arbitrary function generator, power cable, USB cable, Lab View and IVI drivers, ArbExpress software, instructions