The USB DrDAQ Data Logger PP706 has something for everyone: whether youre a teacher looking for a fun way to perform data logging experiments in the classroom, a student wanting an inexpensive introduction to data logging and oscilloscopes, a computer programmer who wants to use C++ to monitor and control inputs and outputs of real-world devices, a hobbyist who wants to monitor and control their environment, or a professional wanting to measure pH under laboratory conditions — DrDAQ is all you need!
Built-in sensors for light, sound and temperature allow you to start using your USB DrDAQ Data Logger straight out of the box. The USB DrDAQ also has an RGB LED that you can program to show any 1 of 16.7 million colours.
A PC based data logger is only as good as its software and the USB DrDAQ comes with a complete software package that enables you not only to use your DrDAQ as a data logger (PicoLog) but also as an oscilloscope and AWG (arbitrary waveform generator) using PicoScope. Both PicoLog and PicoScope are easy to use applications.
Please see RS 749-1917 for a full DrDAQ kit containing not just the logger, but additional sensors for pH, temperature, humidity and a scope probe.
Very low cost
Built in sensors for light, temperature and sound (level and waveforms)
Measure pH — just plug in any standard pH electrode
Measure voltages and resistances
Sockets for external sensors (temperature, humidity etc)
Use DrDAQ to capture fast signals (eg sound waveforms)
Outputs for control experiments
Simply plug in to your PC and measure
Includes SDK for writing custom applications
USB connected and powered
Use up to 20 USB DrDAQs on a single PC
Channel | Range | Resolution | Accuracy |
pH (BNC) | 0 to 14 pH | 0.02 pH | Sensor-calibration dependent |
Redox/ORP (Oxidation/Reduction) (BNC shared with pH) | ±2 V @1012 Ω | 1.2 mV | Sensor-calibration dependent |
Resistance (screw terminal) | 0 to 1 MΩ | 250 Ω @ 10 k | 5% |
External sensors (3 x FCC68 4/4) | Measure 0 to 2.5V (Also supply power to external sensors and identify sensor type via ID resistor) | 0.1 mV | 1% |
Oscilloscope spectrum analyser channel (BNC) | ±1.25 V, ±2.5 V, ±5 V, ±10 V@1M Ω | 8 bits | ±3% (DC) |
Sound waveform | ±100 | ±0.2 | Not calibrated |
Sound level | 55 to 100 dBA | 1 dBA | 5 dBA |
Temperature | -10 to +70 °C (+14 to 158 °F) | 0.1 °C @ 25 °C (32.2 °F @ 77°F) | 2 °C @ 25 °C (35.6 °F @ 77°F) |
Light | 0 to 100 | 0.1 | Not calibrated |
20kHz Arbitrary Waveform generator | ±1.5 V amplitude plus ±1.5 V offset | 10-bit | 3% |
Digital I/O | 4 channels 0 to 5V TTL compatible | NA | NA |
USB DrDAQ Data Logger Board
Software CD
USB Installation Guide
Cable: USB2 1.8m blue